diff options
Diffstat (limited to 'src/hid-tmt248')
| -rw-r--r-- | src/hid-tmt248/hid-tmt248.c | 335 |
1 files changed, 335 insertions, 0 deletions
diff --git a/src/hid-tmt248/hid-tmt248.c b/src/hid-tmt248/hid-tmt248.c new file mode 100644 index 0000000..af3aaa9 --- /dev/null +++ b/src/hid-tmt248/hid-tmt248.c @@ -0,0 +1,335 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +#include <linux/usb.h> +#include <linux/hid.h> +#include "../hid-tmff2.h" + +#define T248_MAX_EFFECTS 16 +#define T248_BUFFER_LENGTH 63 + +static const u8 setup_0[64] = { 0x42, 0x01 }; +static const u8 setup_1[64] = { 0x0a, 0x04, 0x90, 0x03 }; +static const u8 setup_2[64] = { 0x0a, 0x04, 0x00, 0x0c }; +static const u8 setup_3[64] = { 0x0a, 0x04, 0x12, 0x10 }; +static const u8 setup_4[64] = { 0x0a, 0x04, 0x00, 0x06 }; +static const u8 setup_5[64] = { 0x0a, 0x04, 0x00, 0x0e }; +static const u8 setup_6[64] = { 0x0a, 0x04, 0x00, 0x0e, 0x01 }; +static const u8 *const setup_arr[] = { setup_0, setup_1, setup_2, setup_3, setup_4, setup_5, setup_6 }; +static const unsigned int setup_arr_sizes[] = { + ARRAY_SIZE(setup_0), + ARRAY_SIZE(setup_1), + ARRAY_SIZE(setup_2), + ARRAY_SIZE(setup_3), + ARRAY_SIZE(setup_4), + ARRAY_SIZE(setup_5), + ARRAY_SIZE(setup_6) +}; + +static const unsigned long t248_params = + PARAM_SPRING_LEVEL + | PARAM_DAMPER_LEVEL + | PARAM_FRICTION_LEVEL + | PARAM_RANGE + | PARAM_GAIN + ; + +static const signed short t248_effects[] = { + FF_CONSTANT, + FF_RAMP, + FF_SPRING, + FF_DAMPER, + FF_FRICTION, + FF_INERTIA, + FF_PERIODIC, + FF_SINE, + FF_TRIANGLE, + FF_SQUARE, + FF_SAW_UP, + FF_SAW_DOWN, + FF_AUTOCENTER, + FF_GAIN, + -1 +}; + +/* TODO: sort through this stuff */ +static u8 t248_pc_rdesc_fixed[] = { + 0x05, 0x01, /* Usage page (Generic Desktop) */ + 0x09, 0x04, /* Usage (Joystick) */ + 0xa1, 0x01, /* Collection (Application) */ + 0x09, 0x01, /* Usage (Pointer) */ + 0xa1, 0x00, /* Collection (Physical) */ + 0x85, 0x07, /* Report ID (7) */ + 0x09, 0x30, /* Usage (X) */ + 0x15, 0x00, /* Logical minimum (0) */ + 0x27, 0xff, 0xff, 0x00, 0x00, /* Logical maximum (65535) */ + 0x35, 0x00, /* Physical minimum (0) */ + 0x47, 0xff, 0xff, 0x00, 0x00, /* Physical maximum (65535) */ + 0x75, 0x10, /* Report size (16) */ + 0x95, 0x01, /* Report count (1) */ + 0x81, 0x02, /* Input (Variable, Absolute) */ + 0x09, 0x31, /* Usage (Y) TODO: clutch? */ + 0x26, 0xff, 0x03, /* Logical maximum (1023) */ + 0x46, 0xff, 0x03, /* Physical maximum (1023) */ + 0x81, 0x02, /* Input (Variable, Absolute) */ + 0x09, 0x35, /* Usage (Rz) TODO: brake? */ + 0x81, 0x02, /* Input (Variable, Absolute) */ + 0x09, 0x36, /* Usage (Slider) */ + 0x81, 0x02, /* Input (Variable, Absolute) */ + 0x75, 0x08, /* Report size (8) */ + 0x26, 0xff, 0x00, /* Logical maximum (255) */ + 0x46, 0xff, 0x00, /* Physical maximum (255) */ + 0x09, 0x40, /* Usage (Vx) TODO: what is this? */ + 0x81, 0x02, /* Input (Variable, Absolute) */ + 0x09, 0x41, /* Usage (Vy) TODO: --||-- */ + 0x81, 0x02, /* Input (Variable, Absolute) */ + 0x09, 0x33, /* Usage (Rx) TODO: --||-- */ + 0x81, 0x02, /* Input (Variable, Absolute) */ + 0x09, 0x34, /* Usage (Ry) TODO: --||-- */ + 0x81, 0x02, /* Input (Variable, Absolute) */ + 0x09, 0x32, /* Usage (Z) TODO: --||-- (gas?) */ + 0x81, 0x02, /* Input (Variable, Absolute) */ + 0x09, 0x37, /* Usage (Dial) */ + 0x81, 0x02, /* Input (Variable, Absolute) */ + 0x05, 0x09, /* Usage page (Button) */ + 0x19, 0x01, /* Usage minimum (1) */ + 0x29, 0x1a, /* Usage maximum (13) */ + 0x25, 0x01, /* Logical maximum (1) */ + 0x45, 0x01, /* Physical maximum (1) */ + 0x75, 0x01, /* Report size (1) */ + 0x95, 0x1a, /* Report count (26) */ + 0x81, 0x02, /* Input (Variable, Absolute) */ + 0x75, 0x06, /* Report size (6) */ + 0x95, 0x01, /* Report count (1) */ + 0x81, 0x03, /* Usage (Variable, Absolute, Constant) */ + 0x05, 0x01, /* Usage page (Generic Desktop) */ + 0x09, 0x39, /* Usage (Hat Switch) */ + 0x25, 0x07, /* Logical maximum (7) */ + 0x46, 0x3b, 0x01, /* Physical maximum (315) */ + 0x55, 0x00, /* Unit exponent (0) */ + 0x65, 0x14, /* Unit (Eng rot, Angular Pos) */ + 0x75, 0x04, /* Report size (4) */ + 0x81, 0x42, /* Input (Variable, Absolute, NullState) */ + 0x65, 0x00, /* Input (None) */ + 0x81, 0x03, /* Input (Variable, Absolute, Constant) */ + 0x85, 0x60, /* Report ID (96), prev 10 */ + 0x06, 0x00, 0xff, /* Usage page (Vendor 1) */ + 0x09, 0x60, /* Usage (96), prev 10 */ + 0x75, 0x08, /* Report size (8) */ + 0x95, 0x3f, /* Report count (63) */ + 0x26, 0xff, 0x00, /* Logical maximum (256) */ + 0x46, 0xff, 0x00, /* Physical maximum (256) */ + 0x91, 0x02, /* Output (Variable, Absolute) */ + 0x85, 0x02, /* Report ID (2) */ + 0x09, 0x02, /* Usage (2) */ + 0x81, 0x02, /* Input (Variable, Absolute) */ + 0x09, 0x14, /* Usage (20) */ + 0x85, 0x14, /* Report ID (20) */ + 0x81, 0x02, /* Input (Variable, Absolute) */ + 0xc0, /* End collection */ + 0xc0, /* End collection */ +}; + +static int t248_interrupts(struct t300rs_device_entry *t248) +{ + u8 *send_buf = kmalloc(256, GFP_KERNEL); + struct usb_interface *usbif = to_usb_interface(t248->hdev->dev.parent); + struct usb_host_endpoint *ep; + int ret, trans, b_ep, i; + + if (!send_buf) { + hid_err(t248->hdev, "failed allocating send buffer\n"); + return -ENOMEM; + } + + ep = &usbif->cur_altsetting->endpoint[1]; + b_ep = ep->desc.bEndpointAddress; + + for (i = 0; i < ARRAY_SIZE(setup_arr); ++i) { + memcpy(send_buf, setup_arr[i], setup_arr_sizes[i]); + + ret = usb_interrupt_msg(t248->usbdev, + usb_sndintpipe(t248->usbdev, b_ep), + send_buf, setup_arr_sizes[i], + &trans, + USB_CTRL_SET_TIMEOUT); + + if (ret) { + hid_err(t248->hdev, "setup data couldn't be sent\n"); + goto err; + } + } + +err: + kfree(send_buf); + return ret; +} + +int t248_wheel_destroy(void *data) +{ + struct t300rs_device_entry *t300rs = data; + + if (!t300rs) + return -ENODEV; + + kfree(t300rs->send_buffer); + kfree(t300rs); + return 0; +} + +int t248_set_range(void *data, uint16_t value) +{ + struct t300rs_device_entry *t248 = data; + + if (value < 140) { + hid_info(t248->hdev, "value %i too small, clamping to 140\n", value); + value = 140; + } + + if (value > 900) { + hid_info(t248->hdev, "value %i too large, clamping to 900\n", value); + value = 900; + } + + return t300rs_set_range(data, value); +} + +static int t248_send_open(struct t300rs_device_entry *t248) +{ + int r1, r2; + t248->send_buffer[0] = 0x01; + t248->send_buffer[1] = 0x04; + if ((r1 = t300rs_send_int(t248))) + return r1; + + t248->send_buffer[0] = 0x01; + t248->send_buffer[1] = 0x05; + if ((r2 = t300rs_send_int(t248))) + return r2; + + return 0; +} + +static int t248_open(void *data, int open_mode) +{ + struct t300rs_device_entry *t248 = data; + + if (!t248) + return -ENODEV; + + if (open_mode) + t248_send_open(t248); + + return t248->open(t248->input_dev); +} + +static int t248_send_close(struct t300rs_device_entry *t248) +{ + int r1, r2; + t248->send_buffer[0] = 0x01; + t248->send_buffer[1] = 0x05; + if ((r1 = t300rs_send_int(t248))) + return r1; + + t248->send_buffer[0] = 0x01; + t248->send_buffer[1] = 0x00; + if ((r2 = t300rs_send_int(t248))) + return r2; + + return 0; +} + +static int t248_close(void *data, int open_mode) +{ + struct t300rs_device_entry *t248 = data; + + if (!t248) + return -ENODEV; + + if (open_mode) + t248_send_close(t248); + + t248->close(t248->input_dev); + return 0; +} + +int t248_wheel_init(struct tmff2_device_entry *tmff2, int open_mode) +{ + struct t300rs_device_entry *t248 = kzalloc(sizeof(struct t300rs_device_entry), GFP_KERNEL); + struct list_head *report_list; + int ret; + + + if (!t248) { + ret = -ENOMEM; + goto t248_err; + } + + t248->hdev = tmff2->hdev; + t248->input_dev = tmff2->input_dev; + t248->usbdev = to_usb_device(tmff2->hdev->dev.parent->parent); + t248->buffer_length = T248_BUFFER_LENGTH; + + t248->send_buffer = kzalloc(t248->buffer_length, GFP_KERNEL); + if (!t248->send_buffer) { + ret = -ENOMEM; + goto send_err; + } + + report_list = &t248->hdev->report_enum[HID_OUTPUT_REPORT].report_list; + t248->report = list_entry(report_list->next, struct hid_report, list); + t248->ff_field = t248->report->field[0]; + + t248->open = t248->input_dev->open; + t248->close = t248->input_dev->close; + + if ((ret = t248_interrupts(t248))) + goto interrupt_err; + + /* everything went OK */ + tmff2->data = t248; + tmff2->params = t248_params; + tmff2->max_effects = T248_MAX_EFFECTS; + memcpy(tmff2->supported_effects, t248_effects, sizeof(t248_effects)); + + if (!open_mode) + t248_send_open(t248); + + hid_info(t248->hdev, "force feedback for T248\n"); + return 0; + +interrupt_err: +send_err: + kfree(t248); +t248_err: + hid_err(tmff2->hdev, "failed initializing T248\n"); + return ret; +} + +static __u8 *t248_wheel_fixup(struct hid_device *hdev, __u8 *rdesc, + unsigned int *rsize) +{ + rdesc = t248_pc_rdesc_fixed; + *rsize = sizeof(t248_pc_rdesc_fixed); + return rdesc; +} + +int t248_populate_api(struct tmff2_device_entry *tmff2) +{ + tmff2->play_effect = t300rs_play_effect; + tmff2->upload_effect = t300rs_upload_effect; + tmff2->update_effect = t300rs_update_effect; + tmff2->stop_effect = t300rs_stop_effect; + + tmff2->set_gain = t300rs_set_gain; + tmff2->set_autocenter = t300rs_set_autocenter; + /* T248 only has 900 degree range, instead of T300RS 1080 */ + tmff2->set_range = t248_set_range; + tmff2->wheel_fixup = t248_wheel_fixup; + + tmff2->open = t248_open; + tmff2->close = t248_close; + + tmff2->wheel_init = t248_wheel_init; + tmff2->wheel_destroy = t248_wheel_destroy; + + return 0; +} |