1 files changed, 41 insertions, 0 deletions
diff --git a/docs/CONTRIBUTING.md b/docs/CONTRIBUTING.md
new file mode 100644
index 0000000..0e2c7b6
--- /dev/null
+++ b/docs/CONTRIBUTING.md
@@ -0,0 +1,41 @@
+# Contributing
+
+## Overview
+This file contains general contributing information, but individual parts also may have more specific information to them, linked here:
+    - ``[FFBEffects-T300RS](./FFBEffects-T300RS.md)``: Force Feedback Effects example for T300RS
+    - ``[FFBEffects-T248](./FFBEffects-T248.md)``: Force Feedback Effects example for T300RS
+    - ``[To-Do](./TODO.md)``: TO-DO list for maintainers
+    - ``[Structure](https://github.com/Kimplul/hid-tmff2/wiki#structure-of-the-thrustmaster-device-stack)``: Structure of Thrustmaster device stack
+
+## How to add in support for a new T-series wheel?
+Should probably not be too often that you need this info, but essentially use wireshark like in the previous example, but spin up a Windows virtual machine and install the Thrustmaster drivers on to it, and pass the device to the virtual machine. I prefer to use ``qemu`` with ``virt-manager`` as a frontend. With the wheel working under Windows, install [fedit.exe](https://gimx.fr/download/b882e209a0ac023d03abbf560dfc3f25fe6367ca/fedit.zip) and methodically go through all effects the device supports and compare the USB packets the driver sends out. You should be able to build up a table of what each value in the USB packet means, see [FFBEffects-T300RS.md](./FFBEffects-T300RS.md) for an example of what I found out about the T300.
+
+## How to capture what effects a game sends to the driver?
+Use ffbwrap from ffbtools: [github:berarma/ffbtools](https://github.com/berarma/ffbtools)
+The documentation gives good examples, but tl;dr; For steam, insert the following into a game's launch options:
+```shell
+$ ffbwrap --logger=/home/$USER/game.log /dev/input/by-id/usb-Thrustmaster_Thrustmaster_T300RS_Racing_wheel-event-joystick -- %command%
+```
+This will create a file called ``game.log`` (with additional timestamp) in your home directory. Preferably change the name to suit the game, but you do you.
+
+> **NOTE:** Most fixes presented in the documentation are more or less obsolete by now, but the tool is still very useful for logging purposes.
+
+## How to capture what USB packets the driver sends to the device?
+I'd recommend [wireshark](https://www.wireshark.org/)
+
+Usb capture setup is fairly straightforward: [wireshark/CaptureSetup](https://wiki.wireshark.org/CaptureSetup/USB#linux)
+
+Here's what I typically do when starting capturing:
+
+- Run ``sudo modprobe usbmon``. This will load a kernel module that allows Wireshark to read the USB packets.
+- Open wireshark with root privileges. There are some ways to allow wireshark to access the packets with regular user privileges, I just haven't bothered with it.
+- Select ``usbmon0`` from the view that opens up by default.
+- The screen will quickly fill up with noise from other devices connected to the computer, so you will have to filter out the noise.
+    - Run ``lsusb`` in a terminal. Look for the T300 in the list, you should see something like ``Bus 001 Device 006: ID 044f:b66e ThrustMaster, Inc. Thrustmaster T300RS Racing wheel``
+    - From the previous command, the Bus and Device fields can be used to filter out only packets from/to the device. To see all packets coming from the wheel, add in a filter ``usb.src ~ "1\.6\..*"``, where ``1`` is in this case from the ``Bus`` field and ``6`` from the ``Device`` field. To see all packets coming from the device, use ``usb.dst``.
+    - This data is probably also filled with a lot of cruft. Data to/from endpoint 2 is button state info, which is probably unnecessary. To see FFB data being sent to the device, use endpoint 1, i.e. ``usb.dst == "1.6.1"``. ``~`` is a Perl-compliant regex operator, whereas ``==`` just matches the string directly. To see both data coming from the device and going to it, use ``usb.dst == "..." || usb.src == "..."``.
+    - There is also endpoint 0, ``usb.src == "1.6.0"`` but it doesn't seem to be used for much.
+- Use the three buttons in the top left of the screen to start, stop and restart captures.
+- Do whatever you want with the device, packets should automatically be captured. When you want to save your capture to a file, stop the recording and go to ``File > Export Specified Packets`` and make sure ``Displayed`` is selected. This will apply the filter you've been using, and will only include the packets that are visible in Wireshark, i.e. it applies the filter you've specified.
+
+> **NOTE:** Every time you unplug and replug your wheel, its ``Device`` field will probably change.